Description:
UniGas 1000 P+T has been designed for the gas network installation and plant maintenance technicians demand. It's a compact, rugged, modular and simple-to-use instrument. The pressure range is from -10 up to 120 mbar (automatically compensating the ambient temperature changes) and it comes with a procedure for the gas network leak detection. 

The Unigas 1000 P+T can be used for a wide variety of test and measurements: the pressure and temperature measurement, the leak testing, etc...

• Gas leak detector (sniffer) simply connecting the probe to measure the gas leaks working with one instrument only.
• Ambient CO monitoring for working in safety places.
• Long draft measurements (±200 Pa, 0.1 Pa) for natural draft boiler.

The wide backlit LCD display and the built-in impact printer let you display and print all your measurements and your test reports.
Specification:

• Differential pressure internal sensor:
  • Range : -10...120 hPa
  • Resolution : 0.01 hPa
  • Accuracy : ±3 Pa <300 Pa
  • ±1% rdg. >300 Pa
• Gas pipework pressure internal sensor:
  • Range: -10...120 mBar
  • Resolution: 0.1 mBar
  • Accuracy : ±1% of the reading
  • Program for the pressure decay leaks
• Low pressure external probe for draft measurements:
  • Range: ±200 Pa
  • Resolution: 0.1 Pa
  • Accuracy : ±1% of the reading
  • Chimney probe kit
• Tc K thermometer:
  • Range: 0 a +600°C
  • Resolution: 0.1 °C
  • Accuracy : ±(0.3% rdg.+0.3°C)
• Ambient temperature:
  • Internal sensor: Pt100
  • Range: -10 to +100°C
  • Resolution : 0.1 °C
  • Accuracy: ±(0.2% rdg.+0.15°C)
• Power supply: High capacity Mi-MH rechargeable battery pack
• Charging time: 8h at 90% with instrument off
• Battery life: 6 hours (typical) continuous use (without printing and backlight).
• Printer: Internal impact type 24 columns with paper roll. (10m)
• Printer power supply: from the analyser battery pack.
• Printed report header: 4 programmable lines.
• Display: 40x58 mm alpha-numeric LCD with backlight device.
• Infrared port: compatible with HP82240B cordless printer.
• Operating temperature: from -5°C to +45°C - from -10 to 90% RH
• Storage temperature: from -20 to +50°C (3 months maximum at temperatures exceeding the operational limits).
• Dimensions and Weight: 115x90x330 mm - 1.1 kg with battery and printer

UNIGAS 1000 P+T - 8204 - A - B - C - D

• A - Pressure Sensors
  • 1 - 100hPa internal differential sensor
  • 2 - 200Pa external draft probe (with chimney probe kit)
• B - Mains adapter / charger
  • 1 - 115V ±10% 50/60Hz - USA plug
  • 2 - 230V ±10% 50/60Hz - Schuko plug
  • 3 - 230V ±10% 50/60Hz - UK plug
  • 4 - 230V ±10% 50/60Hz - Europe plug
  • 5 - 100V ±10% 50/60Hz - USA/Japan plug
• C - Options (up to 7 elective)
  • 1 - Built-in impact printer
  • 2 - External probe for gas leak detector (sniffer)
  • 3 - External CO ambient probe for monitoring
  • 5 - Leak test KIT (pump+hose+adapters)
  • 7 - ABS carrying case
  • 9 - DBGas 2004 STANDARD software
  • A - A combustion analyser transformer kit (O2 + CO)
• D - Calibration certificate
  • 1 - Eurotron attributed EA
• X - Instruction manual
  • ENG - English

Dasheet

 Description:
The RL2200 is particularly well suited to maintenance, verification and reception of telephone lines, and more generally of all low voltage cables. Its unique dual display offers both digital readings, for high accuracy measurements, and analogue readings to <> measurements tendency and monitor threshold limits. The RL2200 measures loop resistance, insulation resistance, AC and DC voltages. Threshold limits can be set on resistance and insulation measurements.

Features:

• Dual analogue/ digital display
• Multi-purpose
• Quick cable loading feature
• Auto-discharge feature
• Rugged and designed for field use
• Included as standard : Carrying case for "hands free" use, & measuring leads and "crocodile" type clamps

Calibration Certificates:
Conformity or calibration certificates are also optionally available, but must be requested with the instrument at the time of ordering. Select required option before adding to cart.

QM05 Certificate

• Simply states that the device operates within the tolerances defined in the instrument specification.

QM04 Certificate

• As QM04 Certifiacte, but also lists the primary test instruments used during testing. However, no test data is provided (price available upon request)

QM01 Certificate

• Full COFRAC calibration certificate. COFRAC is the French equivalent of UKAS and DKD.

 Datasheet

 This wide matrix of AOIP probes and Sensors is a glimpse of the wide number of tools made available by AOIP. However due to the large number of possible applications and customizable options these probes are not available on our online store but can be easily ordered by calling our head office on 44 (0) 01943602001



TEMPERATURE PROBES FOR USE IN PRIMARY & SECONDARY LABORATORIES

670Q	Reference probe with platinium resistance	-200°C à 670°C
96178	Standard Thermometer with platinium resistance	0°C à 1000°C
AN 5681	Calibrating probe for pt25 sensor	-189°C à 661°C
AN 5847	Calibrating probe for pt100 sensor	-180°C à 450°C
909 Q	Platinum resistant probe	-200°C à 670°C
AN 5848	Calibrating work probe Pt 100	-180°C à 450°C
AN 5850	Calibrating work probe Pt 100	-180°C à 450°C
1600	Thermocouple probe R & S reference	0°C à 1600°C
Pt/Au	Thermocouple probe Platinium/Gold	0°C à 1000°C

TEMPERATURE PROBES FOR USE IN INDUSTRIAL LABORATORIES

935-14-61	Probe platinium resistant pt100	-50°C à 250°C
935-14-13	Probe platinium resistant pt100	-196°C à 250°C
935-14-16	Probe platinium resistant pt100	-100°C à 450°C
935-14-72	Probe platinium resistant pt100	-50°C à 670°C
935-14-82	Probe platinium resistant pt100	-50°C à 250°C
935-14-85	Probe platinium resistant pt100	-50°C à 250°C
935-14-95L	Probe platinium resistant pt100	-200°C à 165°C
935-14-95H	Probe platinium resistant pt100	-80°C à 670°C
935-14-98	Probe platinium resistant pt100	-50°C à 350°C
935-14-91	Thermocouple probe R or S	0°C à 1300°C
935-14-88	Thermocouple probe R or S	0°C à 1300°C
935-14-63	Thermocouple probe N	0°C à 1300°C
935-14-64	Thermocouple probe N	0°C à 1300°C
935-14-65	Thermocouple probe N	0°C à 1300°C
935-14-66	Sonde thermocouple N	0°C à 1300°C
935-14-67	Thermocouple probe N	0°C à 1300°C
935-14-68	Thermocouple probe N	0°C à 1300°C

TEMPERATURE PROBES FOR POCKET THERMOMETERS 

S101	Probe with resistive sensors for ambiant air or gas	-100°C à 200°C
S102	Probe with resistive sensors for ambiant air or gas	-100°C à 200°C
S103	Probe with resistive sensors for ambiant air or gas	-100°C à 200°C
T101	Probe thermocouple K	-100°C à 1000°C
T102	Probe thermocouple K	-100°C à +500°C
T104	Probe thermocouple K for ambiant air or gas	-50°C à 250°C
T105	Sharp Penetrating thermocouple K probe	-100°C à 300°C
T703A	Thermocouple K probe for surfaces	-50°C à 500°C
T704A	Thermocouple K probe for surfaces	-50°C à 500°C
T106	Thermocouple K probe for surfaces	0°C à 500°C

PJ 6301 tester calibrator is a high accurate instrument of measurement and simulation of physical and electrical values: DC voltage and current, resistance and temperature from thermocouples and RTDs.
Its graphical dual display enables INPUT and OUTPUT values to be simultaneously displayed and leads to keyboard simplification. On-line help messages are available at any time in case additional information on displayed options is needed.

Numerous further functions open a wide range of applications: data processing, customized signal linearisation, recorder analog OUTPUT, transmitter function, ramp and step function, relative measurement...

PJ 6301 is presented in a compact benchtop housing for on site use as well as panel mounted use. It is fully programmable via RS 232 and IEEE 488 interface, which makes it the perfect instrument for test benches and automatic test equipment applications.
Main applications
Due to outstanding performance and quality, PJ 6301 can achieve many exacting requirements. Applications may be separated into 3 groups:

• Accurate measurement for calibration of signal generators such as sensors, voltage and current sources, resistance, and for process control instruments, checking
• Temperature simulation, voltage and curretn sourcing resistance simulation for calibration of measuring equipment such as chart recorders, logical controllers, PLC analog inputs
• Test of signal conditioners and transmitters, using PJ 6301 simultaneous sensor simulation, and output signal measurement capability
   

DATALOG series is aiming to measure, handle, process, monitor and record analog and digital signals from all common types of physical sensors. The system can be supplied in various configurations with a choice of INPUT and OUTPUT boards as well as options such as built-in display and printer.

Whatever the system chosen and thanks to high metrological measurement quality and numerous internal functions, DATALOG systems are well adapted to all kinds of applications:

• Stand alone data acquisition system without PC
• Sensor calibration system
• Testing bench
• Conditioning chamber and autoclave validation
• PC INPUT / OUTPUT interface
• Acquisition module for programmable controller or standard supervisor

Functionalities	DATALOG 20	DATALOG 90	DATALOG 140
Board number	2	9	14
Configurable INPUT channels	Universal analogue channels: temperature (thermocouples, RTDs), resistance 1mΩ / 300 KΩ Digital inputs: process signals, DC voltage: 1 µV / 100 V, AC voltage: 10 µV / 100 V Strain gauges: full / half / quarter bridge
OUTPUT channels	Relay and analogue outputs
Measurement mode	Multiplexer
Accuracy	Thermocouples: 0.008 % RDG / RTDs: 0.01 % RDG DC voltage: 0.008 % RDG / AC voltage: 0.3 % RDG Resistance: 0.01 % RDG Strain gauges: 0.05 % RDG
Sampling	100 samples/s
Internal functions	Embedded software providing advanced calculation possibilities: mathematical / boolean / statistical computations defined on / between channels 4 programmable thresholds + 1 relay output per channel 100 programmable tasks of channel scanning
Memory	6 storage parts of 8000 samples + optional PCMCIA slot
Additional functions	Alarm relays, ASCII / Modbus programmable interface DLL library / LABVIEW driver / OPC
Many options	Keypad / display / internal printer / PCMCIA board Protection cover / rack kit / shunt / IEEE mechanical adapter Low speed converter 690000 counts
Power supply	11 / 28 V + optional battery pack
Communication modes	RS 485 and RS 232

DATALOG data sheet

 Description:
The CP6632 is a Test Tool for Process Signals adding value to the instrument is the inclusion of Measurement and Generation protection for easy configuration of on site systems.
Simple and robust, the CP6632  has been designed to simplify maintenance operations and commissioning of sensors and trans- mitters using process signals such as 4-20 mA or 0-10V.

Specification:

• Adapted to the different working modes of the process world thanks to scaling and different specific ranges
• High precision: 150 ppm of reading
• Temperature Coefficients very low: 15 ppm rdg/°C for voltage and 20 ppm rdg/°C for current: Accuracy is preserved even in  difficult operating conditions
• Measurement up to 50V
• Simulation up to 15V
• Measurement and emission up to 25mA
• CP6632 cleaverly designed graphic interface makes it easy to program the device and read the measurements

Calibration Certificates:
Conformity or calibration certificates are also optionally available, but must be requested with the instrument at the time of ordering. Select required option before adding to cart.

QM05 Certificate

• Simply states that the device operates within the tolerances defined in the instrument specification.

QM04 Certificate

• As QM04 Certifiacte, but also lists the primary test instruments used during testing. However, no test data is provided (price available upon request)

QM01 Certificate

• Full COFRAC calibration certificate. COFRAC is the French equivalent of UKAS and DKD.

Accessories:

• We also offer the full range of accessories for this product. For more information please contact AOIP UK on +44 (0) 1943 602001

 Datasheet

Functionalities	SA 32
- Universal INPUT channels:	Pt100 (0.01°C resolution) and RTDs (0.1°C resolution) Resistance 1mΩ / 3 KΩ DC voltage: 1 µV / 10 V
- OUTPUT channels:	2 relay outputs + 0 / 2.5 V recopy analog output
- Accuracy:	Thermocouples: 0.008 % RDG / RTDs: 0.01 % RDG DC voltage: 0.008 % RDG / AC voltage: 0.3 % RDG Resistance: 0.01 % RDG
- Sampling:	100 samples/s
- Memory:	Bulk memory + optional PCMCIA slot
- Internal functions:	Embedded software providing advanced configuration of up to 100 channels and calculation possibilities: conditional processing procedure / mathematical / statistical computations defined on / between channels 4 programmable thresholds per channel
- Power supply:	Internal battery, mains supply and 11 / 28 V
- Communication modes:	RS 485 and RS 232
- Additional functions:	Counters: 1 channel 50 Hz, 1 digital board, 1 incremental channel, 6 countings 100 Hz, 2 countings 100 kHz DLL library / LABVIEW driver
- Options:	Digital I/O board (both options are not compatible)

SA32 data sheet

The MEGOHM 200 is a multi-purpose electronic resistance measurement instrument particularly suited for maintenance, verification and reception of telephone lines, and more generally of all low voltage cables.
It measures insulation resistance, loop resistance, AC and DC voltage and detects threshold crossings.

• Analogue and digital megohmmeter
• Analogue and digital continuity ohmmeter
• Adjustable test voltage from 50 to 500 V
• Rugged, lightweight and IP54 for onsite use

Datasheet